When the ton bag sling is connected to the bag body, there are many forms such as top hanging, bottom hanging, side hanging, etc., and they are connected through sutures, so sutures are also very important. Just relying on the high strength of the sling, the base fabric and sutures cannot reach a certain strength, nor can the overall high performance of the container bag be ensured. For any container bag that can achieve a coefficient of more than 5 times, two of the four lifting rings or one of the two lifting rings must have a tensile function of more than two and a half times the additional load. Even if the two slings are disconnected, the container bag will There will be no problem overall. Container bags are mostly used for hoisting. When hoisting, the quality of its slings and seams is very important to ensure the quality of its products. In the actual production and processing process, the amount of filling masterbatch needs to be strictly controlled, generally around 2%. If the masterbatch is added too much, it will also have a certain impact on the quality. Generally, when each batch of products is produced, a lifting test will be conducted on them. Only products that pass the test can be mass-produced and shipped.

Soft pallets emerged after plastic hard pallets and wooden pallets. The main reason is that the prices of plastic hard pallets and wooden pallets are relatively high, and the products are bulky. In addition, it is troublesome to transport them back to the other party, which causes unnecessary increases in production costs. It's troublesome, and stacking small packaging pallets is easy to dump, so soft pallets finally came into being. The soft pallet avoids the sliding and scattering of small packages during use. He uses eight slings to carry them around, with fastening methods on them. The commonly used slings for soft pallets are 1 ton in width 8 cm in width and 4 mm in thickness. Generally, 1.5 tons and 2 tons of soft pallets are double-layered. The slings should generally not exceed 2 meters in height. To achieve the fixing effect, the linked bags can generally be sewn. To strengthen the anti-slip bottom part, a cross-shaped bag can be added to prevent slipping. To fix the small package, a streamer can be added to achieve the effect of fixing the fork. The forklift is also used during the insertion process. Improve the tightening effect, and continue to fix it after loosening to achieve the tightening effect. The standards generally used are similar to the standard parameters of ton bags. The basic shape of soft pallets is generally square, sometimes rectangular, diamond-shaped, and the workmanship is all kinds of weird. Generally, there are well-shaped, mesh-shaped, outer well-inner fork-shaped, outer well-inner straight-shaped, and double well-shaped. , but they are used for the anti-slip load-bearing of soft pallets. As long as the small packages are staggered and stacked neatly, and the tops are crossed and fastened, they will not easily slide and scatter.

Ton bags, container bags, and soft pallets are widely used in developed countries as packaging products for transportation and storage. In the bag-making process, the shrinkage of recycled material woven fabric is greater than that of new material woven fabric, so a certain margin should be left when cutting. The more recycled materials are mixed into the woven bag, the worse its anti-aging ability will be. When storing, be sure to store it in a cool, dark, and sunlight-resistant place. When using, pay attention to the time limit and do not leave it for too long.